Tuesday, May 14, 2024

Part 2 - A little bit of a mod already

 The PCB was too thick for the edge connectors. When ordered it was just on the default of 1.6mm. Perhaps it should have been closer to 1mm. Had to do some pretty brutal sanding with the belt sander to get to fit. Here is the Timer board with a bit of modification.


And a close up of another.


They are still a little 'snug' but better than being too loose. 

Soon will be running out of excuses and will have to power it up and test the first three boards.

Epp 
😐



No comments:

Post a Comment

New Freebee Frames

 New Freebee keyboard frames arrived Friday!! 11 - April They are 1.6mm the Cherry MX spec says 1mm for a frame but these still click in nic...